2021 H+K McDonald's Catalog
PENTAIR
WATER FILTRATION EVREV943740, EVREV943741, EVREV943742
HK# EVREV943740, EVREV943741, EVREV943742 Water Filtration Item HK# Description 1 EVREV313657 Bracket, quad 2 EVREV314245 Shroud 3 EVREV962891 HFUF Cartridge 4 EVREV313540
Cartridge
HFUF Pretreatment
SEN 2SR-BW
Kit HK#
Description
Twin Endurance® Cartridge Kit Triple Endurance Cartridge Kit Quad Endurance Cartridge Kit Endurance SC HFUF Cartridge
EVREV962880
0
2
1
EVREV962881
0
3
1
Pretreatment housing
EVREV962882
0
4
1
EVRSH144368
5
Housing wrench
EVREV962891
1
0
0
EVREV962714
6*
2SR-BW cartridge
------------
7**
SEN Cartridge
EVREV311135
8
Manifold
EVREV313658
9
Bracket pretreatment
Valve, ball ¾ FNPT x ³⁄₈ barb Valve, check, ¾ NPT female
EVREV312248
10
EVREV311450
11
CARTRIDGE CHANGE DETERMINATION Replace all the Everpure® SEN Filter Cartridges when capacity is reached or if flow becomes inadequate, but at least annually. The cartridges on multiple cartridge systems, including the Everpure® 2SR-BW Scale Inhibitor Cartridge, should be changed at the same time. CAUTION: If the flow has decreased it is likely that the HFUF Cartridge is damaged. The system pressure gauges provide a means to read system pressures. The left gauge will show water pressure in front of the SEN Filter Cartridges. The second (right) gauge shows water pressure after the SEN Cartridges and going to the applications. The difference between the two pressures is an indication of the pressure drop through the SEN Cartridges. A large drop in the pressure during normal operation, > 30 psig (2.07 bar), will be caused by plugged SEN Cartridges. In this case, the SEN and HFUF Cartridges should be changed. NOTE: If visible particles are on the top surface of the HFUF, these could lead to plugging or damage to the hollow fibers. Use a screen or pleated filter to prevent these particles from entering the HFUF pretreatment. The HFUF Cartridge should be changed every (3) years.
EVREV307850 Support ring
12
EVREV311409
13
Pressure gauge 160 PSI
Valve, ball ¾ FNPT x ¾ MNPT Cap BB WH HFPP ¾ " PR MILL
EVREV311407
14
EVRSH154198
15
Tubing ¾ " ID gray
EVREV313686
16
EVREV311403
17
QC plug
EVRSH143495
18
Tube, silicone
Elbow ¾ " FNPT PVC SCH 80 SR
EVREV313604
19
Cap ¾ " NPT for O.P.M.
EVREV311134
20
Tee, ¾ NPT, SS Reinforced
EVREV310055
21
Tank, RO-4, ¾ " NPT mounted Head BW, ¾ MNPT x ½ barb Barb, ¾ " NPT x ¾ " hose, nylon
EVREV313667
22
EVREV313470
23
EVREV305783
24
EVREV314286
25
Flow regulator
EVREV311133
26
Universal fitting with ret-ring
Tubing ¾ " ID, gray
EVREV313686
27
EVREV309977 Hex nipple ¾ "
28
Nipple, ¾ " MNPT, machined
EVREV314135
29
EVR43445
30
Power supply with adapters
EVR4002956
31
Controller
EVREV313665 EVREV314145 EVR61823 EVR1266722
Solenoid valve Solenoid cable Turbine kit ¾ " Turbine cable
32
33
*Also available in replacement kits **Only available in replacement kits
9.135
♦
www.hkionline.com
Phone: 800.521.3987
Made with FlippingBook Ebook Creator