New Restaurant Guide
Clean Conveyor (continued)
8 Lift tail pulley.
1 4 Rinse the entire length of the frame underneath the conveyor belt and under the tail pulley with a separate clean, sanitizer-soaked towel.
A. QC Industries, LLC PF50 & PF51 Conveyor System Daily PR70 D1
9 Manually advance belt to reveal opposite side
Spray the entire frame underneath the conveyor belt and under the tail pulley with sanitizer solution and allow to air dry.
15
10
Wash, rinse and sanitize the visible belt (following same steps 3 - 6 )
1 6 Lower tail pulley into Place.
1 1 Repeat Steps 7-10 four times until entire belt is clean
1 7 Replace both pins in conveyor’s tail pulley.
1 2 After the belt is clean and sanitized, spray a clean, sanitizer-soaked towel with APSC solution.
1 8 Replace the clean and
sanitized guards by sliding over twist nuts at matching number positions and twisting nuts to horizontal position to lock in place
Cleaning solutions and products should never come into contact with internal electrical compo nents.
1 9 Turn conveyor to START.
1 3 Wipe entire length of frame underneath conveyor belt and under tail pulley. Discard the soiled towel into the soiled towel bucket.
Page 2 of 2
©McDonald’s Corporation · Planned Maintenance Manual · October 2016
Made with FlippingBook flipbook maker