H+K Canada McDonald's Catalogue
FRYERS, FRY DISPENSERS, BAGGING STATIONS + ACCESSORIES
MAC FRY INSERT F RY B AGGING S TATION I DENTIFICATION
FB08 - 94 SERIES This unit may have 2 doors as shown OR 1 door and 1 open cabinet and glass on the Left or Right hand side. Please confirm from the previous page that this is the correct Fry Station.
Please note if measurements are not performed correctly within 1/8 of an inch of the actual unit you run the risk of ordering the wrong Mac Fry Insert. This could result in RMAs and restocking fees.
OVERALL FRY BAGGING STATION DIMENSIONS
Please measure the Width and Depth of your unit.
Depth
Width
Critical Measurements: please remove your current Fry Ribbon, Sorting Tray, and Salt Tray to take these measurements.
C - Inside left to Right D - Inside Front to Rear
Critical Measurements: please remove your current bagging station's side glass to take these measurements.
Top
If the illustration to the left does not look like the exact shape of your current side glass, please stop here and go back to page 12 and re-identify which Fry Station you have. Once you have all of the above measurements please contact you H+K Representative or call the Order Desk at 1-800-387-5863
Left
Right
Bottom
6.16
♦
www.hkionline.com
Phone: 800.387.5863
Made with FlippingBook Publishing Software