H+K Canada McDonald's Catalogue

FRYERS, FRY DISPENSERS, BAGGING STATIONS + ACCESSORIES

MAC FRY INSERT F RY B AGGING S TATION I DENTIFICATION

92 SERIES Please confirm from the previous page that this is the correct Fry Station. Glass may be on the Left or Right Hand side.

Please note if measurements are not performed correctly within 1/8 of an inch of the actual unit you run the risk of ordering the wrong Mac Fry Insert. This could result in RMAs and restocking fees.

OVERALL FRY BAGGING STATION DIMENSIONS

Please measure the Width and Depth of your unit.

Depth

Width

Critical Measurements: please remove your current Fry Ribbon, Sorting Tray, and Salt Tray to take these measurements. C - Inside left to Right D - Inside Front to Rear F - Inside Worktop to Rear Ledge

Critical Measurements: please remove your current bagging station's side glass to take these measurements. If the illustration to the left does not look like the exact shape of your current side glass, please stop here and go back to page 12 and re-identify which Fry Station you have. Once you have all of the above measurements please contact you H+K Representative or call the Order Desk at 1-800-387-5863

Left Hand Glass

Right Hand Glass

Top

Top

Left

Left

Right

Right

Bottom

Bottom

6.17

♦

www.hkionline.com

Phone: 800.387.5863